Features

1. High quality insulation pipe:
1) several types: PE /XPE/XPE/Rubber, two layers /single layer, etc.
2) Thickness 8mm~20mm.
3) Anti-UV,Low water absorption, Low thermal conductivity
4) Surface can be printed with words
5) Standards comply with EN13501, Ml,
ASTM E84,AS1530, RoHS, etc.
2. All sizes and thicknes of high quality copper tubes, as your requirements. Standards comply with EN12735,IS H3300, ASTM B280
AS1571, RoHs, etc.
3. Type: single or pair types.
4. With or without fared nuts
5. Length: 1~50 meters.
6. Suitable for any gas: R22,R407C,R410AR404A,R507C,etc.
7. Light weight., good thermal conductivity
8. Easy and quick installation, saving time and money, Easy transport
9. Seamlessness prevents from moisture entry or dripping.
10.Can be with accessories: Nut, Drain pipe.Tape, PVC wall-fix tape, Joint insuation pipe,PVC wallhole sleeve and cap, Electrical tape.Seal plaster, etc.

Insulated corrugated copper pipe
Insulated Copper Tube-Pair Coil
size	Copper tube outer diameter xwall thickness  (mm)	Insulation thickness	internal diameter	length
1/4+3/8	6.35x0.56-9.52x0.56	8mm/9mm	8.0-12.0	3-30m
1/4+3/8	6.35x0.61-9.52x0.61	8mm/9mm	8.0-12.0
1/4+3/8	6.35x0.71-9.52x0.71	8mm/9mm	8.0-12.0
1/4+3/8	6.35x0.81-9.52x0.81	8mm/9mm	8.0-12.0
1/4+1/2	6.35x0.56-12.7x0.56	8mm/9mm	8.0-14.0
1/4+1/2	6.35x0.61-12.7x0.61	8mm/9mm	8.0-14.0
1/4+1/2	6.35x0.71-12.7x0.71	8mm/9mm	8.0-14.0
1/4+1/2	6.35x0.81-12.7x0.81	8mm/9mm	8.0-14.0
1/4+5/8	6.35x0.56-15.58x0.61	8mm/9mm	8.0-18.0
1/4+5/8	5.35x0.61-15.8x0.71	8mm/9mm	8.0-18.0
1/4+5/8	6.35x0.71-15.83x0.81	8mm/9mm	8.0-18.0
1/4+5/8	5.35x0.81-15.8x81.02	8mm/9mm	8.0-18.0
3/5+5/8	9.52x0.56-15.58x0.71	8mm/9mm	12.0-18.0
3/5+5/8	9.52x0.61-15.88x0.81	8mm/9mm	12.0-18.0
3/8+5/3	9.52x0.71-15.88x0.91	8mm/9mm	12.0-18.0
3/8+5/8	9.52x0.81-15.88x1.02	8mm/9mm	12.0-18.0
3/8+3/4	9.52x0.56-19.05x0.81	8mm/9mm	12.0-22.0
3/5+3/4	9.52x0.61-19.05x0.91	8mm/9mm	12.0-22.0
3/5+3/4	9.52x0.71-19.05x1.02	8mm/9mm	12.0-22.0
3/5+3/4	9.52x0.81-19.05x1.14	8mm/9mm	12.0-22.0
1/2+3/4	12.7x0.56-19.05x0.81	8mm/9mm	14.0-22.0
1/2+3/4	12.77x0.61-19.05x0.91	8mm/9mm	14.0-22.0
1/2+3/4	12.77x0.71-19.05x1.02	8mm/9mm	14.0-22.0
1/2+3/4	12.7x0.81-19.05x1.14	8mm/9mm	14.0-22.0